Scraper conveyor ZEO-DC

The bulk material is loaded into the enclosed casing and then the product is transported by the pulling conveyor part, the chain with cleats, to the discharging area. Technical features: -Decreasing of specific energy consumption due to the using of guide members and scrapers mode from polylactam. -Conveyor ease of assembly due to the manufacturing of the details on close control equipment. -The usage of European gear-motor drives with high service-factor and efficiency. -Building-block concept of assembly with a possibility of usage imported components. -The usage of fettle from different materials(polyurethane, constructive steel), depending on usage environment and customer requirements. -The usage of high-resistance steels Cт-45, Ст-40х in loaded details of drive heads and drag units. -The possibility of working time regulation of the equipment by constructive characteristics depending on usage environment and customer requirements. -Usage of imported and national drag leaf and fork-shaped chains. -The possibility of conveyor completing with manual and automatic valves due to the customer requirements. -The minimization of serviceability during the exploitation by using of collapsible elements of chain moving system(star gears, drag rollers), and also the usage of easy-off cover plates. -Decreasing of product breakage on 4-6% by using the partial execution mode of transportation with low speeds and by special calculated parameters.